Sceptre TV With Built-in DVD Player Not Working? [6 Solutions]

Sceptre TV with built-in DVD player not working

Having a Sceptre TV with a built-in DVD player but can’t watch your favorite show because the device is not working can be frustrating. Well, you are alone here. Many Sceptre TV owners are having the same issue. This guide will walk you through potential fixes to get your Sceptre TV in order.

Sceptre TVs are known to offer great value for money. They provide excellent performance while being affordable on the pocket. However, they are still a piece of tech at the end of the day and can run into problems like any other TV.

If your Sceptre TV with a built-in DVD player is not working, worry not. There are some easy fixes to throw this problem out of your device. We’ve jotted them in the next section.

More Posts to Read:
1. How to See Members of a Private Telegram Channel?
2. How to See Someone Else’s Liked Songs on Spotify?

Fix: Sceptre TV With Built-in DVD Player Not Working

Try these solutions on your Sceptre TV and start watching your favorite shows or movies.

1. Check the Power Cable and Outlet

First things first, you need to make sure that the power cable is firmly connected to the outlet. To ensure this, remove the cable and plug it again. This time, with a slightly more push.

Turn on the switch and press the power button on the remote to check if your Sceptre TV is working. If yes, wonderful! However, if the problem persists, plug the power cable into a different outlet to ensure that the outlet has no issues.

If the TV is still not turning on, you may want to try other solutions as well.

2. Remove the Surge Protector

A surge protector is a great device to protect your electrical appliances from sudden voltage spikes or downfall. However, they can also become faulty.

To check if the surge protector has any issues, remove the TV’s power cable and plug it directly into the wall outlet. If the TV starts working, you should get a surge protector.

3. Inspect All Connections

Make sure all the cables and connections are plugged into the correct port. Another important thing to check here is that the connections should be firm. You can remove all the connections and cables and then plug them in again.

If you are using an HDMI cable, try using a new cable to check if it is causing the problem.

4. Use a Different Disc

If the TV turns black or does not show content after inserting a disk into the DVD player, chances are that the disk is either too dirty or corrupted. Gently clean the disk using a soft cloth and check if the problem is fixed.

If the problem persists, insert a different disk into the DVD player.

5. Check Your TV Remote

Despite many tries, if your Sceptre TV is not turning on, try replacing the remote batteries. Often we forget to replace batteries. If you have not recently replaced the batteries, get a new pair and insert it in your remote. Try turning on your TV to check if the problem is fixed.

6. Reset Your TV

If your Sceptre TV with a built-in DVD player is still not working, try resetting it as the last resort before contacting a technician. Many Sceptre TVs have a reset button on the back. If your’s TV has it, press and hold the button using an object such as a pen for 10-15 seconds. The resetting process should begin.

If the above method does not reset your TV, disconnect the power cable and press the power button for 30 seconds. The power button is usually located either on the front or back side.

Wrapping It Up

We hope this guide was useful. If the problem persists, there could be a hardware fault. You should contact Sceptre TV support or a verified technician to get it repaired for you.

More Posts:
1. How to Know if a Telegram Link is Safe?
2. Sceptre TV Turns on but Black Screen, How to Fix?

Similar Posts